Wireless interactive HH9000 Series Manual do Utilizador Página 1

IP CameraProduct Manualnolimits.March 2008, Version 6.0.0.5

3. Searching Device and ActiveX Download to Installation 3.1 Searching Device and Modify Network Parameter Use Search NVS software to search and mod

Write down the IP Address, Subnet Mask, Default Gateway, then setup the IP Camera address according to your computer’s IP address. For example: 192.1

3.3 Installing the ActiveX Control and Logging In You need to install the camera’s ActiveX Control when you access the IP Camera for the first time.

4. Software Configurations 4.1 IP Camera Live view Live view as follows： In the Live view interface, User can photo Snap, Record, Re

4.2 IP Camera Video Playback Click【Playback】and you will be directed to the following screen： The user can search for recorded imag

Note: The yellow icon means the current time, the blue icon means current optional time. The first row defines the hour unit of the recorded image; t

System Clock: Clicking TIME SYNC will synchronize the camera’s time with the current computer time. 【NTP Parameter】：Input the correct NTP server add

【Advanced image setting】 as follows: 【Audio】：Set audio ON/OFF（Default: OFF）,there are two models: Mic and Line input. If users don’t need au

4.5 IP Camera Motion Alarm Settings Setting motion alarm parameters: include the scheduled time, sensitivity, alarm output, alarm de

4.6 IP Camera Sensor Alarm Settings Setting sensor alarm parameters: included the schedule time, switch of the alarm, sensor type,

IP Camera User Manual 2 /30 The HH9000 Series of video cameras are intended for network video surveillance ap

4.7 IP Camera Network Settings The device will restart after setting any basic parameters. If the IP camera is connected to your LAN

4.8 IP Camera Advanced Parameters Mail Setting：When a motion alarm is triggered, the device will send an alert to the provided email addr

4.9 IP Camera User Management You can setup two users for one IP Camera. One administrative account and one guest account. Ad

Dome and Pan Decoder connect with RS485 port. When there is control device to connect with IP Camera, RS485 parameters need to be set according to t

Appendix 1. Network Interface for IP Camera Network ports for the IP Camera: TCP 80(Web port) 5000(Communication port, Audio/Video data transm

1. Login to the camera using Internet Explorer and select [ network setting ]; 2. Fill in the desired local IP address for your camera. 3. E

Simply check Enable DHCP. 2. Internet You can connect the IP camera to the internet in three ways: Fixed IP mode, ADSL, and ADSL and IP camera’s PP

The lining drawing as the following： Fills the username and password which applies in the DDNS server on the DDNS setting item, makes the port mappi

¾ ADSL and IP camera’s PPPoE accesses the internet mode Fills the username and password which applies in the DDNS server on the DDNS setting item

29/ 30 You can install the ActiveX Control in two ways: (1) Auto-Installation You need to lower the security level of the IE temporarily in order to

IP Camera User Manual 3 /30 Table of Contents 1. Product Overview...

9. The audio quality is poor or unclear. Reason: When there are many noises for the Audio and the distortion is very serious, please check the input

IP Camera User Manual 4 /30 1. Product Overview 1.1 Product Features  High-density and programmable com

IP Camera User Manual IR Distance Refer to model: Respectively 10M,20M,30M,50M Lens Parameter Refer to model:

IP Camera User Manual Software ◆IE 6.0 or greater ◆DirectX8.0 or greater ◆TCP／IP protocol 2. Overview and

IP Camera User Manual Junction Box Junction Box (rear view) Interfac

IP Camera User Manual 2.4 Hardware Installation 2.4.1 Connecting the IP camera into a Router/Switch/Hub

Step 2: Connect Cat5e cable to RJ45 port on the junction box. Step 3: Connect power supply (DC 12V or 24V for Dome Camera). Step 4: Connect the ot